16 Temmuz 2018 | Pazartesi
 

SCI Yayın Bilgileri:

1) "Influence of preform preheating on dry sliding wear behavior of 304 stainless steel reinforced A356 aluminum matrix composite produced by melt infiltration casting", R. Gecü, Ş. H. Atapek, A. Karaaslan, Tribology International, 115, 608-618, (2017) -
2) "Effect of single, duplex and multilayer thin hard film coatings on the wear resistance of 1.2343 tool steel", G. Aktaş Çelik, Ş. Polat, Ş. H. Atapek, Transactions of the Indian Institute of Metals, , DOI: 10.1007/s12666-017-1171-1, (2017) -
3) "Metallographical examinations on quenched and tempered steels subjected to ballistic impact", Ş. H. Atapek, , H. K. Zeytin, Ş. Polat, G. Güven, Journal of Dynamic Behavior of Materials, 3(3), 426-435, (2017) -
4) "Microstructural and mechanical characterization of solidified austenitic stainless steels", G. Aktaş Çelik, Ş. Polat, Ş. H. Atapek, G. N. Haidemenopoulos, Archives of Foundry Engineering, 17(3), 163-167, (2017) -
5) "Microstructural and tribological characterization of aluminium bronzes with additions of Si and Cr", B. P. Pisarek, B. Kowalski, Ş. H. Atapek, Ş. Polat, T. Tüfekçi, Archives of Foundry Engineering, , , (2017) -
6) "Tribological characterization of Al-bronzes used as mold materials", Ş. H. Atapek, G. Aktaş Çelik, Ş. Polat, B. Pisarek, Archives of Foundry Engineering, , , (2017) -
7) "Tribological behavior of CrN coated Cr-Mo-V steels used as die materials", G. Aktaş Çelik, Ş. Polat, Ş. H. Atapek, International Journal of Minerals, , , (2017) -
8) "Fractographical analysis of fatigue failed Cu-2.55Ni-0.55Si alloy", Ş. H. Atapek, S. G. Pantelakis, Ş. Polat, A. N. Chamos, G. Aktaş, Theoretical and Applied Fracture Mechanics, 83, 60-66, (2016) -
9) "A case study of a stress corrosion cracking failure in a AA5083 mold material used for curing rubber compounds", A. Alkan, S. Gümüş, Ş. H. Atapek, Ş. Polat, Protection of Metals and Physical Chemistry of Surfaces, in press, , , (2016) -
10) "Dry sliding wear behavior of cast A7075 and A7075 / SAF 2205 composite materials", A. Karaaslan, A. Kısasöz, Ş. H. Atapek, K. A. Güler, High Temperature Materials and Processes, 35(5), 487-492, (2016) -
11) "Effect of cobalt on the aging kinetics and the properties of a CuCoNiBe alloy", Ş. H. Atapek, Materials Testing, 57(1), 17-21, (2015) -
12) "Direct reduction of ferrous oxides to form an iron-rich alternative charge material", H. İ. Ünal, E. Turgut, Ş. H. Atapek, A. Alkan, High Temperature Materials and Processes, , 34(8), 751–756, (2015) -
13) "Characterization of the fracture behaviour of X42 microalloyed pipeline steel", H. İ. Ünal, Ş. H. Atapek, B. G. Beleli, Ş. Polat, S. Gümüş, E. Erişir, , International Journal of Structural Integrity, 6(5), 1-11, (2015) -
14) "Dry sliding wear behavior of cast roller materials", O. Birbaşar, E. Türedi, Ş. H. Atapek, M. Zeren, , International Journal of Surface Science and Engineering, 9 (2-3), 253-263, (2015) -
15) "Wear behavior of surface treated X45MoCrV5-3-1 tool steel at room and elevated temperatures", G. Aktaş, Ş. Polat, Ş. H. Atapek, Acta Physica Polonica A, 127(4), 1221-1224, (2015) -
16) "Structural and electrochemical characterization of Zn-TiO2 and Zn-WO3 nano composite coatings electrodeposited on St 37 steel", Ü. Erten, H. İ. Ünal, S. Zor, Ş. H. Atapek, Journal of Applied Electrochemistry, 45, 991–1003, (2015) -
17) "Solid particle erosion behavior of cast alloys used in mining industry ", Ş H. Atapek, S. Fidan, International Journal of Minerals, Metallurgy and Materials, 22(12), 1283-1292, (2015) -
18) "Understanding of polymer quenchant (polyalkylene glycol) characteristic during quenching process on tool steel", M. Onan, H. İ. Ünal, C. Onan, Ş. H. Atapek, International Journal of Microstructure and Materials Properties, 9(1), 71-78, (2014) -
19) "Modeling and thermal analysis of solidification in a low alloy steel", Ş. H. Atapek, E. Erişir, S. Gümüş, Journal of Thermal Analysis and Calorimetry, 114(1), 179-183, (2013) -